/ BM-GE-520 Owner’s Manual Ver.01-2009
Page 3
Spare parts must comply with the technical requirements specified by the
manufacturer. This is always guaranteed if original spare parts are used.
To perform maintenance work correctly it is imperative to be equipper with the proper
tools for the task in question.
The location and the operation of fire extinguishers must be made known on
each work site!
Take note of the facilities for reporting of, and fighting fires!
1.2 Personnel selection and qualification
Fundamental duties:
Work on the machine may only be undertaken by trained personnel.
Only trained personnel may be employed. Note the statutory minimum age! Specify clearly
the responsibilities of personnel for operation, setting up, servicing and maintenance work!
Make sure that only authorized personnel operate or work on the machine!
Define responsibilities of the machine operator, with regard to traffic safety regulations, and
inform him not to take instructions from third parties who may not be complying with the
local safety requirements!
Personnel who are being trained to operate equipment, may only use the machine under
constant supervision of an experienced person!
Work on electrical equipment, may only be undertaken by a skilled electrician or
by trained persons under the supervision of a skilled electrician
,
in according with
the local electrical engineering regulations
.
1.3 Safety precautions applicable to some operating sequences
DO not allow any method of working that impairs safety!
Recognised official procedures have to be used, to ensure the machine is operated in a safe,
and best conditions.
Only operate the machine when all safety devices, and related safety equipment,
are present and operational!
Check the machine visually for any damage and defects at least once a day!
