www.bomaxengineering.com
/
/ BM Owner’s Manual Ver.01-2008 Page 14
4.
Connect one stop wire leader to engine mounting bolt.
Another leader to engine
stop connector.
5.
Connect throttle control wire to engine.
Set the throttle lever to the idle position by pushing it away from the operator’s
position towards the engine. Loosen the screw that crimps the throttle cable to allow
free movement of throttle cable .
Connect the throttle cable to the engine. Keep in mind there should be a piece of
wire installed on the machine to show you where to route the throttle cable. When
connecting the cable housing, make sure that no more than 1/4 (6.4mm) of the cable
housing protrudes past the housing clamp on the engine.
Tighten the clamp on the throttle control, operator position of the handle.
Honda Engine
5.
Inspect all the screw and lock nut which is safety tightened
