BOMANN KG 7320.1, Инструкция по эксплуатации

Страница: 28 / 40

28
cooling operation at low power con-
sumption. Enough clearance is nec-
essary.
-
Gap to the back approx. 50～70
mm, to the side walls and above the
device each approx. min. 100 mm;
-
Place the appliance so that the ap-
pliance door can open without being
impeded.

Only install at a location with an am-
bient temperature suitable for the cli-
mate class of the appliance.
The climate class can be found under
"Technical Data" and on the rating la-
bel located in the interior or on the
appliance rear.

Place the appliance on a steady and
safe surface. If the appliance is not
horizontally leveled, adjust the feet
accordingly.

Avoid the installation:
-
near heaters, next to a stove, direct
sunlight or any other heat sources;
-
at locations with high humidity (e.g.
outdoors, bathroom), as metal parts
would be susceptible to corrosion
under such circumstances;
-
near volatile or flammable materials
(e.g. gas, fuel, alcohol, paint, etc.),
in rooms which may have poor air
circulation (e.g. garages).
-
Do not expose the appliance any
weather.
Electrical connection
WARNING:

The installation to the mains supply
must conform to the local standards
and regulations.

Improper connection may cause to an
electric shock!

Do not modify the appliance plug. If
the plug does not fit properly to the
outlet, let install a proper outlet by an
authorized specialist.

The accessibility of the power plug
must be ensured to disconnect the
appliance from the power supply in
case of emergency.

Make sure that the voltage supply
matches the specifications on the rat-
ing label before connecting.

Connect the mains cable to a properly
installed and earthed wall outlet.

If the plug after installation is not
accessible, a corresponding discon-
nect device must be available to meet
the relevant safety regulations.