BOMANN GSP 855, Инструкция по эксплуатации

Страница: 13 / 24

13
Starting a Rinse Program Starting a Rinse Program Starting a Rinse Program Starting a Rinse Program
Rinse cycle table
Rinse cycle table Rinse cycle table
Rinse cycle table
Select a suitable program depending on dishes and degree of soiling.
Pr Pr Pr Proooogram gram gram gram Program Program Program Program information information information information Program Program Program Program sequence sequence sequence sequence
Detergent Detergent Detergent Detergent
pre/main pre/main pre/main pre/main (g) (g) (g) (g)
Time Time Time Time
(Min)
(Min) (Min) (Min)
Energy Energy Energy Energy
(kWh) (kWh) (kWh) (kWh)
Water Water Water Water
(l(l(l(l))))
Rinse Rinse Rinse Rinse
aid aid aid aid
Intensive
heavily soiled dishes and
dried leftovers
Pre-rinse (50°C)
Main rinse (60°C)
Rinse 1
Rinse 2
Rinse 3 (70°C)
Drying
5/22
(or Tab)
165 1.4 16.5
ECO ECO ECO ECO
(*EN 50242)
standard program for
normally soiled dishes,
daily use
Pre-rinse
Main rinse (45°C)
Rinse (65°C)
Drying
5/22
(or Tab)
190 0.77 9
90 Min
for lightly soiled dishes
Main rinse (65°C)
Rinse 1
Rinse 2 (65°C)
Drying
27
(or Tab)
90 1.15 11.5
Rapid
rapid rinse cycle for light-
ly soiled dishes without
drying Main rinse (45°C)
Rinse 1 (50°C)
Rinse 2 (55°C)
20 30 0.7 10
NOTE NOTE NOTE NOTE::::
•
The extra addition of rinse aid can improve the drying result.
•
*EN 50242: this program is the test program and of combined energy and water consumption most efficient.
The information for comparability:
Capacity: 9 settings; Position of the upper basket: upper wheels on rails;
Rinse aid setting: 6
Control panel Control panel Control panel Control panel
1111 POWER- button: to switch on/off the power supply. The power control lamp shows the power supply.
2222 Program sequence indication: shows the program status, Pre-rinse->Main rinse->Rinse->Drying.
3333 Rinse aid warning lamp: lights up when the rinse aid dispenser needs to be refilled.
4444 Salt warning lamp: lights up when the salt container needs to be refilled for water softening.
5555 Program selection switch: to select the rinse program. The program control lamp indicates the selection.
6666 START/PAUSE- button: to start/pause the selected or running program.
Program control lamp is lighting: operation
Program control lamp is flashing: pause