BOMANN GSP 855, Инструкция по эксплуатации

Страница: 8 / 24

8
•
If the plug after installation is not accessible, a corresponding disconnect device must be available to meet
the relevant safety regulations.
Prior Using for the first Time Prior Using for the first Time Prior Using for the first Time Prior Using for the first Time
Before using your dishwasher for the first time:
Before using your dishwasher for the first time: Before using your dishwasher for the first time:
Before using your dishwasher for the first time:
A. Filling salt into the salt container (water softener)
B. Fill the rinse aid dispenser
C. Fill in detergent
CAUTION: CAUTION: CAUTION: CAUTION:
•
Use only salt, rinse aid and detergent for dishwashers. Other products may damage the appliance.
•
Always consider the dosage and storage recommendations on the sales packaging.
WARNING:
WARNING: WARNING:
WARNING:
Keep salt, rinse aid and detergent out of reach for children.
A
AA
A. Filling
. Filling . Filling
. Filling salt into the salt container
salt into the salt container salt into the salt container
salt into the salt container (water softener)
(water softener) (water softener)
(water softener)
Water softener
Water softener Water softener
Water softener
The water hardness varies regionally. If hard water is used in the dishwasher, deposits form on the dishes and
kitchen utensils. The appliance is equipped with a water softener, that removes lime and minerals from the
water by using water softening in the salt container. Your local water authority can advise you on the hardness
of the water in your area.
Adjusting the salt consumption Adjusting the salt consumption Adjusting the salt consumption Adjusting the salt consumption
The salt consumption can be adjusted according to your water hardness and therefore optimally regulated.
•
Switch on the appliance using the POWER- button.
•
Press the START/PAUSE- button within the first 60 seconds for about 5 seconds.
•
By repeatedly pressing the START/PAUSE- button, the water hardness can be changed accordingly:
H1->H2->H3->H4->H5->H6. The control lamp shows the setting.
•
A few seconds after the completion of your choice, the water hardness is automatically saved. Alternative-
ly, finish the setup by the POWER- button.
The following settings (benchmarks) are recommended:
Water hardness Water hardness Water hardness Water hardness
Adjustment
Adjustment Adjustment
Adjustment
P
PP
Program control lamp
rogram control lamp rogram control lamp
rogram control lamp
is lighting
is lighting is lighting
is lighting
Salt consumption Salt consumption Salt consumption Salt consumption
(gramm/cycle) (gramm/cycle) (gramm/cycle) (gramm/cycle)
°dH* °dH* °dH* °dH* °Clark* °Clark* °Clark* °Clark* mmol/l mmol/l mmol/l mmol/l
0 – 5 0 – 6 0 – 0.94 H1 Rapid 0
6 – 11 7 – 14 1.0 – 2.0 H2 90 Min 9
12 – 17 15 – 21 2.1 – 3.0 H3 (factory setting) 90 Min + Rapid 12
18 – 22 22 – 28 3.1 – 4.0 H4 Glass 20
23 – 34 29 – 42 4.1 – 6.0 H5 Glass + Rapid 30
35 – 55 43 – 69 6.1 – 9.8 H6 Glass + 90 Min 60
NOTE NOTE NOTE NOTE:::: *°dH: German degree / °Clark: British degree