BOMANN GSE 335, Инструкция по эксплуатации

Страница: 17 / 28

17
Transport and Transport and Transport and Transport and Unpacking the Appliance Unpacking the Appliance Unpacking the Appliance Unpacking the Appliance
Transport the appliance
Transport the appliance Transport the appliance
Transport the appliance
Transport the appliance, if possible, only in vertical
position. Otherwise, it is absolutely necessary to
allow the appliance standing upright for a few hours
before installation ”Prior to first use”. Protect the ap-
pliance during transport against weather influences.
Unpack the appliance Unpack the appliance Unpack the appliance Unpack the appliance
•
Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler
and cardboard packaging.
•
To prevent hazards, check the appliance for any
transport damage.
•
In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE NOTE NOTE NOTE::::
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance Overview Appliance Overview Appliance Overview Appliance Overview
1111 Temperature control
2222 Freezing drawers
3333 adjustable feet
Delivery scope Delivery scope Delivery scope Delivery scope
4 x freezing drawer, 1 x ice-cube tray, 1 x ice-
scraper, built-in material
Installation Installation Installation Installation
Condition
Condition Condition
Conditions for the installation location
s for the installation location s for the installation location
s for the installation location
•
Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
-
Refer to the instructions which we give you in
“Built-in”;
-
Clearance to the front must be created so that
the appliance door can open without being im-
peded.
•
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the
appliance.
•
Look for stable, horizontal appliance position.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
•
Avoid the installation: Avoid the installation: Avoid the installation: Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
-
at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
-
near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.) and in rooms which
may have poor air circulation (e.g. garages).
-
Do not expose the appliance any weather.
Electrical connection Electrical connection Electrical connection Electrical connection
WARNING: WARNING: WARNING: WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an electric
electric electric
electric
shock shock shock shock!