Installing the oven
Installing the oven
Installing the oven
Installing the oven
•
Put the appliance with the connecting cable f
into the prepared cabinet a bit.
•
Do the connection to the hob as well as
mains, see "Electrical connection".
•
Insert the oven into the cabinet opening
ly. Make sure that the cables does
(bent, squeezed or twisted).
•
Fix and secure the oven by using the
screws on the side walls of the cabi
The provided mounting holes
(A) are visible after opening the
oven door on the left and right
frame.
Electrical connection
Electrical connection
Electrical connection
Electrical connection
Information for the
Information for the
Information for the
Information for the authorized expert
authorized expert
authorized expert
authorized expert
WARNING:
WARNING:
WARNING:
WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Connecting the appliance to a domestic power
socket or using multiple sockets or extension c
bles is not permitted.
•
Improper connection may cause to an
shock
shock
shock
shock!
•
Before connecting, ensure that the power supply
corresponds with the information on the rating l
bel (door inside) and the wiring diagram
•
The appliance is suitable for three
current (400V 3N~50/60Hz).
•
The appliance can be adjusted for single
current by a respective bypass on the terminal
block, based on the circuit diagram below. Select
a suitable cord as mains cable, considering the
connection type and nominal power of the oven.
•
Fix the mains cable in the tension relief.
•
Make sure to connect the protective ground to the
terminal of the marked terminal bl
7
with the connecting cable first
as well as to the
mains, see "Electrical connection".
into the cabinet opening complete-
does not restricted
using the supplied
screws on the side walls of the cabinet.
authorized expert
authorized expert
authorized expert
authorized expert
The installation to the mains supply must conform
and regulations.
Connecting the appliance to a domestic power
socket or using multiple sockets or extension ca-
Improper connection may cause to an electric
electric
electric
electric
Before connecting, ensure that the power supply
information on the rating la-
d the wiring diagram.
The appliance is suitable for three-phase and AC
The appliance can be adjusted for single-phase
current by a respective bypass on the terminal
the circuit diagram below. Select
a suitable cord as mains cable, considering the
connection type and nominal power of the oven.
Fix the mains cable in the tension relief.
Make sure to connect the protective ground to the
terminal of the marked terminal block.
•
The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency switch must be at
least 3 mm.
•
Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
or corners.
A
AA
A Terminal block for the hob connection
B
BB
B Socket for power supply
To unlock the socket for the power supply, locate a
srewdriver (1) and move it slightly downwards (2).
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Permissible connection methods
Permissible connection methods
Permissible connection methods
Permissible connection methods
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Each connection requires the protective ground of the
mains to be connected to the E
As connecting cable (not supplied) the following
types are suitable:
-
H05VV-F (3G6.0mm² with single
-
H05VV-F (4G6.0mm² with two
-
H05VV-F (5G2.5mm² with three
Recommendation is the connection option to a three
Recommendation is the connection option to a three
Recommendation is the connection option to a three
Recommendation is the connection option to a three
phase circuit
phase circuit
phase circuit
phase circuit 3 x 16 A!
3 x 16 A!
3 x 16 A!
3 x 16 A!
Terminal box
NOTE
NOTE
NOTE
NOTE::::
L1, L2, L3 = Phase
N = Neutral
E
= Protective ground
The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency switch must be at
e the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
Terminal block for the hob connection
To unlock the socket for the power supply, locate a
srewdriver (1) and move it slightly downwards (2).
Permissible connection methods
Permissible connection methods
Permissible connection methods
Permissible connection methods
Each connection requires the protective ground of the
E
terminal.
As connecting cable (not supplied) the following
F (3G6.0mm² with single-phase)
two-phase)
with three-phase)
Recommendation is the connection option to a three
Recommendation is the connection option to a three
Recommendation is the connection option to a three
Recommendation is the connection option to a three----
