•
Attach and secure the oven by using the
net. The provided mounting holes (A) are visible after opening the o
and right frame.
Electrical connection
Electrical connection
Electrical connection
Electrical connection
Information for the
Information for the
Information for the
Information for the authorized expert
authorized expert
authorized expert
authorized expert
WARNING
WARNING
WARNING
WARNING::::
•
The installation to the mains supply must conform to the local standards and regulations.
•
Connecting the appliance to a domestic power
permitted.
•
Improper connection may cause to an
•
Before connecting, ensure that the power supply corresponds with the information on the rating label and
the wiring diagram.
•
Make sure to connect the protective ground to the terminal of
•
The electrical installation of the oven should be equipped with an emergency switch, which switches off the
whole appliance from the mains supply in an emergency. The
gency switch must be at least 3 mm.
•
The appliance is suitable for three
•
The appliance can be adjusted for single
based on the circuit diagram below. Select a suitable cord as mains cable, considering the connection type
and nominal power of the oven.
•
Fix the mains cable in the tension relief.
•
Arrange the mains cable in such a way that it does not get in contact with
ance. Do not lead it over sharp edges or corners.
Connecting the hob with the oven
Connecting the hob with the oven
Connecting the hob with the oven
Connecting the hob with the oven
Insert the plugs at the end of the hob
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Permissible connection methods
Permissible connection methods
Permissible connection methods
Permissible connection methods
CAUTION
CAUTION
CAUTION
CAUTION::::
•
Voltage of heating element is 230V.
•
Each connection requires the protective ground of the mains
to be connected to the
PE terminal.
8
using the supplied screws on the side walls of the cab
. The provided mounting holes (A) are visible after opening the oven door on the left
authorized expert
authorized expert
authorized expert
authorized expert
The installation to the mains supply must conform to the local standards and regulations.
domestic power socket or using multiple sockets or extension cables is not
Improper connection may cause to an electric shock
electric shock
electric shock
electric shock!
Before connecting, ensure that the power supply corresponds with the information on the rating label and
Make sure to connect the protective ground to the terminal of the marked terminal block.
The electrical installation of the oven should be equipped with an emergency switch, which switches off the
whole appliance from the mains supply in an emergency. The distance between the contacts of the eme
gency switch must be at least 3 mm.
The appliance is suitable for three-phase and AC current (400V 3N~50Hz).
appliance can be adjusted for single-phase current by a respective bypass on the terminal block,
based on the circuit diagram below. Select a suitable cord as mains cable, considering the connection type
Fix the mains cable in the tension relief.
Arrange the mains cable in such a way that it does not get in contact with any hot components of the appl
ance. Do not lead it over sharp edges or corners.
A
AA
A Terminal block for the hob connection
B
BB
B Socket for power supply
To unlock the socket for the power supply, locate a s
and move it slightly downwards (2).
at the end of the hob circuit group in the appropriate socket of the oven terminal block.
230V.
Each connection requires the protective ground of the mains
terminal.
screws on the side walls of the cabi-
ven door on the left
The installation to the mains supply must conform to the local standards and regulations.
socket or using multiple sockets or extension cables is not
Before connecting, ensure that the power supply corresponds with the information on the rating label and
the marked terminal block.
The electrical installation of the oven should be equipped with an emergency switch, which switches off the
distance between the contacts of the emer-
phase current by a respective bypass on the terminal block,
based on the circuit diagram below. Select a suitable cord as mains cable, considering the connection type
any hot components of the appli-
Terminal block for the hob connection
unlock the socket for the power supply, locate a srewdriver (1)
of the oven terminal block.
Recomme
Recomme
Recomme
Recommen-
n-
n-
n-
ded connect
ded connect
ded connect
ded connecti-i-i-i-
on method
on method
on method
on method
