10
Information for disassembly in terms of recycling, recovery and disposal at the end of the life of the appliance
The disassembly of appliances with a gas connection should only be carried out by a licensed gas and water
installer.
The disassembly of appliances with electrical connections should be carried out by a licensed electrician.
For the recycling and recovery of resources give the appliance to:
- a communal collection point waste disposal authorities
- a dedicated disposal company, offering a return system
- a resident electric trader, who voluntary withdraws electrical appliances
Information to reduce the environmental effect of cooking
Information to reduce the environmental effect of cooking
Information to reduce the environmental effect of cooking
Information to reduce the environmental effect of cooking
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
Oven
Oven
Oven
Oven
We recommend the use of dark baking molds and plates, because they conduct the heat better.
Any unnecessary accessories should be removed from the baking chamber before using the appliance.
During cooking, the oven door should remain closed to avoid unnecessary heat loss.
Only preheat the oven if required by the recipe.
If a selection of cooking time is specified, always use the lowest recommended temperature.
Use the residual heat by switching back to minimum temperature shortly before the end of the cooking time.
Save electricity! If you do not need the oven, switch off functions such as interior lighting, program, tempera-
ture
Clean the oven after each application, to keep the cleaning effort as low as possible.
We recommend the use of biological cleaners.
Information
Information
Information
Information to professional users for disassembly
to professional users for disassembly
to professional users for disassembly
to professional users for disassembly
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
Oven
Oven
Oven
Oven
Information for non-destructive disassembly for maintenance purpose
Remove the lamp as described in the manual.
For maintenance purposes, the oven door can be hang out and reinstalled, for the procedure please refer to
the manual.
A further disassembly for maintenance purposes is not provided.
If you would like to exchange defective components, please contact our customer service.
Accumulators are not included.
Information for disassembly in terms of recycling, recovery and disposal at the end of the life of the appliance
The disassembly of appliances with a gas connection should only be carried out by a licensed gas and water
installer.
The disassembly of appliances with electrical connections should be carried out by a licensed electrician.
For the recycling and recovery of resources give the appliance to: