Bomag BW 213 D-4, Инструкция по эксплуатации, Инструкция по техническому обслуживанию

Страница: 15 / 102

Safety regulations
BOMAG
15
BW 213 D-4
Do not work with vibration on hard concrete, on a
cured concrete layer or heavily frozen ground.
When passing under flyovers, bridges, tunnels,
electric power lines etc. keep a sufficient distance.
Driving on slopes and gradients
Do not drive up and down gradients, which exceed
the max. gradability of the machine.
On lopes always drive directly up or down. Change
to the lower speed range before approaching the
slope.
Wet and loose soils reduce the ground adhesion of
the machine and inclinations and slopes consider-
ably. Higher risk of accident!
Behaviour in traffic
Match the speed of the machine to the working
conditions.
Always allow loaded transport vehicles to pass.
Switch the lights on when the visibility is poor.
Keep clear of edges and embankments.
Check the effect of vibration
When compacting with vibration check the effect
of the vibration on nearby buildings and under-
ground supply lines (gas, water, sewage, electric
power supply), stop vibratory compaction if neces-
sary.
Do not work with vibration on hard (frozen, con-
crete) ground. Risk of bearing damage!
Parking the machine
Park the machine on level and firm ground.
Before leaving the machine:
l
straighten the articulated joint to allow easy
access to and from the machine.
l
return the travel lever to neutral position
l
apply the parking brake
l
shut the engine down and pull the ignition key
out.
l
lock the cabin
l
secure the machine against unauthorized use.
Do not jump off the machine, use access steps
and hand rails.
Always secure parked machines, which could be
in the way, with appropriate measures.
Parking on slopes and gradients
Secure the machine against rolling, place metal
chocks in front of and behind the drums.
Filling the fuel tank
Do not inhale fuel fumes.
Refuel only after shutting the engine and the aux-
iliary heater down.
Do not refuel in closed rooms.
No open fire, do not smoke.
Do not spill any fuel. Catch running out fuel, do not
let it seep into the ground.
Wipe off spilled fuel. Keep fuel free of dirt and wa-
ter.
Leaking fuel tanks can cause explosions. Ensure
tight fit of the fuel tank filling cover, replace it if nec-
essary.
Fire protection measures
Make yourself acquainted with the location and the
operation of fire extinguishers. Observe fire warn-
ing and fire fighting installations.
Maintenance
Observe the maintenance tasks described in the
operating and maintenance instructions, including
the exchange of parts.
For service and repair work in the engine compart-
ment support the engine compartment hood.
Maintenance work must only be carried out by
qualified and authorized personnel.
When performing maintenance work above body
height use the access steps on the machine or any
other safe ladders and working platforms. Do not
use machine parts as access steps.
Keep unauthorized persons away from the ma-
chine.
Do not perform maintenance work with the ma-
chine driving or the engine running.
Park the machine on horizontal, level and stable
ground.
Pull the key out of the ignition switch.
Lock the articulated joint with the articulation lock.