Bomag BW 100 ADM-2, Инструкция по эксплуатации, Инструкция по техническому обслуживанию

Страница: 54 / 96

Maintenance
BOMAG 54 BW 80 AD-2 Fam.
5.1 General notes on mainte-
nance
When servicing the machine pay careful attention
to all applicable safety instructions.
Thorough maintenance of the machine ensures
maximum reliability and prolongs the lifetime of im-
portant components. The effort required for these
activities is small when being compared with the
problems which may arise, if these instructions are
not observed.
The terms left/right are always related to travel di-
rection forward.
l
Clean machine and engine thoroughly before
starting maintenance work.
l
For maintenance work park the machine on
level ground.
l
Maintenance work must generally be carried
out with the engine shut down.
l
Depressurize hydraulic lines before working
on them.
l
Disconnect the battery and cover it with insu-
lation material before starting to work on elec-
trical components.
l
Always attach the articulation lock (transport
lock) before starting to work in the articulation
area of the machine.
Environment
Catch running out oils, coolant and fuel and do
not let them seep into the ground or into the
sewage system. Dispose of oils, coolant and
fuels environmentally.
Notes on the fuel system
The lifetime of the diesel engine is decisively de-
pending on the cleanliness of the fuel.
l
Keep the engine free of dirt and water as this
could damage the injection elements of the en-
gine.
l
Zinc lined drums are not suitable for storing fu-
el.
l
The fuel drum should rest for a longer period
of time before drawing off fuel.
l
Do not let the suction hose disturb the sludge
on the bottom of the drum.
l
Do not draw off fuel from near the bottom of
the fuel drum.
l
Fuel left in the fuel drum is not suitable for the
engine and should only be used for cleaning
purposes.
Notes on the engine performance
Combustion air and fuel injection rates of the die-
sel engine have been carefully adjusted and deter-
mine the engine's performance and temperature
level as well as the quality of the exhaust gas.
If your machine has to operate permanently in
"thin air" (at high altitudes) and with full power, you
should consult the after sales service of BOMAG
or the service department of the engine manufac-
turer.
Notes on the hydraulic system
When servicing the hydraulic system cleanliness
is of utmost importance. Make sure, that no dirt or
other contaminating substances enter into the sys-
tem. Small particles can flute valves, cause pumps
to seize and block restrictors and pilot bores,
thereby causing costly repairs.
l
If during the daily oil level check the oil level is
found to have dropped, check all lines, hoses
and components for leakages.
l
Seal external leakages immediately. If neces-
sary inform the after sales service of BOMAG.
l
Do not store drums with hydraulic oil outside,
or at least store them under a cover. With
changing weather water can penetrate
through the bunghole.
l
Always use the filling and filtering unit
(BOMAG part-no. 007 610 01) to fill the hy-
draulic system. This unit is fitted with a fine fil-
ter, which cleans the hydraulic oil and thereby
prolongs the lifetime of the system filter.
l
Clean fittings, filler caps and their immediate
surrounding area before removing them, so
that no dirt can fall in.
l
Do not leave the tank opening unnecessarily
open, cover it so that no dirt can fall in.