Bomag BW 100 ADM-2, Инструкция по эксплуатации, Инструкция по техническому обслуживанию

Страница: 19 / 96

Safety regulations
BOMAG 19 BW 80 AD-2 Fam.
Check the effect of vibration
When compacting with vibration check the effect
of the vibration on nearby buildings and under-
ground supply lines (gas, water, sewage, electric
power supply), stop vibratory compaction if neces-
sary.
Do not activate the vibration on hard (frozen, con-
crete) ground. Risk of bearing damage!
Parking the machine
Park the machine on level and firm ground.
Before leaving the machine:
l
return the travel lever to neutral position
l
apply the parking brake
l
shut the engine down and pull the ignition key
out
l
secure the machine against unauthorized use.
Do not jump off the machine, use access steps
and hand rails.
Always secure parked machines, which could be
in the way, with appropriate measures.
Parking on slopes and gradients
Secure the machine against rolling, place metal
chocks in front of and behind the drums.
Filling the fuel tank
Do not inhale fuel fumes.
Refuel only after shutting the engine and the aux-
iliary heater down.
Do not refuel in closed rooms.
No open fire, do not smoke.
Do not spill any fuel. Catch running out fuel, do not
let it seep into the ground.
Wipe off spilled fuel. Keep dirt and water away
from fuel.
Leaking fuel tanks can cause explosions. Ensure
tight fit of the fuel tank lid, replace immediately if
required.
Fire protection measures
Become acquainted with the location and the han-
dling of fire extinguishers. Observe all fire alarm
and fire fighting possibilities.
Maintenance
Observe the maintenance tasks described in the
operating and maintenance instructions, including
the exchange of parts.
Maintenance work must only be carried out by
qualified and authorized personnel.
For overhead service and assembly work use the
provided access installations or any other safe ac-
cess ladders and work platforms. Do not use ma-
chine parts as access steps.
Keep unauthorized persons away from the ma-
chine.
Do not perform maintenance work with the ma-
chine driving or the engine running.
Park the machine on horizontal, level and stable
ground.
Pull the key out of the ignition switch.
Lock the articulated joint with the articulation lock.
Working on hydraulic lines
Always depressurize the hydraulic lines before
starting to work on them. Hydraulic oil escaping
under pressure can penetrate the skin and cause
severe injury. If injured by hydraulic oil seek med-
ical advice immediately as otherwise severe infec-
tions may result.
When adjusting the hydraulic system do not stand
behind or in front of the drum/wheels.
Do not change the setting of high pressure relief
valves.
Drain hydraulic oil at operating temperature - dan-
ger of scalding!
Catch running out hydraulic oil and dispose of en-
vironmentally.
Always catch and dispose of biological hydraulic
oils separately.
Do not start the engine after draining off the hy-
draulic oil.
After finishing work (with the system still depressu-
rized!) check all connections and fittings for leaks.
Changing hydraulic hoses
All hydraulic hoses must be inspected visually at
regular intervals.
Hydraulic hoses must be changed immediately if:
l
the outer layer is worn down to the metal lining
(e.g. chafing, cuts, cracks)