Maintenance every day
BOMAG
37
BVP 10/36, BVP 18/45
Maintenance every day
5.6
Cleaning the machine
!
Caution
Perform cleaning work only after the engine
has cooled down and with the engine stopped.
Dirty operating conditions, particularly lubri-
cation oil and fuel deposits on the cooling fins
of the engine and the cooling air intake open-
ing have an adverse effect on the cooling of
the engine.
You should therefore immediately seal any oil
or fuel leaks near fuel tank, cylinder or cooling
air intake.
Fig. 31
!
Caution
Do not guide the water jet directly into air filter/
carburettor (1) (Fig. 31), starter/air intake (2)
and the ignition switch (3).
l
After wet cleaning run the engine warm to
evaporate all water residues and to avoid cor-
rosion.
5.7
Check the engine oil level
!
Caution
Park the machine on level ground so that the
engine is in horizontal position.
For quality and quantity of oil refer to the "table
of fuels and lubricants".
Fig. 32
l
Shut down the engine.
l
Pull out the dipstick (Fig. 32) and wipe it clean
with a lint-free, clean cloth.
l
Insert the dipstick into the oil filler socket, do
not screew it in, but pull it out again to check
the oil level.
l
If the oil level is near or below the bottom limit
mark on the dipstick, fill in recommended oil up
to the top dipstick mark (bottom edge of oil fill-
er neck). Do not overfill.
Go to
Discount-Equipment.com
to
order your parts
