Bomag BPR 45/55 D, Руководство по эксплуатации

Страница: 26 / 70

Operation
BOMAG 26 BPR 45/55 D, BPR 55/65 D
Fig. 17
l
Shift the travel lever (Fig. 17) to position "0".
Caution
!
Run the starting process for maximum 20 sec-
onds without interruption and pause for a
minute between starting attempts.
If the engine has not started after two attempts,
determine the cause.
Note
i
The starter switch is designed with a re-start lock.
For a new starting attempt turn the ignition key first
back to position "0".
Fig. 18
l
Turn the ignition key to position "I" (Fig. 18),
the warning buzzer sounds.
l
Then turn the ignition key further to position "II"
to start the engine.
l
As soon as the engine runs, return the ignition
key to position "I". The warning buzzer stops.
Fig. 19
l
After starting take the throttle lever back to po-
sition "MIN" (Fig. 19).
l
Run the engine warm for approx. 1 to 2 min-
utes in idle speed.
Note
i
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
Caution
!
When the engine is running leave the ignition
key in position "I".
690184
0