Bomag BPR 35/60, Инструкция по эксплуатации и техническому обслуживанию

Страница: 52 / 63

Maintenance every year
BOMAG 55 BPR 35/60
6.19 Change the oil in the exciter
shaft housing
Caution
!
Park the machine on level ground.
For quality and quantity of oil refer to the ”ta-
ble of fuels and lubricants”.
Environment
Catch running out old oil, do not let it seep into
the ground and dispose off environmentally.
l
Clean the area around breather and drain
plug.
Fig. 71
l
Tilt the machine to the side with the oil drain
plug and support it safely.
l
Unscrew the bleeding screw (1) (Fig. 71).
l
Unscrew oil drain plug (2), drain and catch run-
ning out old oil.
Fig. 72
l
Tilt the machine to the opposite side and se-
cure it properly.
l
Fill in fresh engine oil through the drain open-
ing (Fig. 72).
l
Park the machine on level ground.
Fig. 73
l
Check the oil level.
The oil level must reach the bottom edge of the
drain bore.
l
Clean oil drain (2) (Fig. 73) and bleeding screw
(1) and assemble both screws with sealing
compound (e.g. BOMAG part-no. 00970016).
690191
1
2
690192
690183
2
1
Go
to
Discount-Equipment.com
to
order
your
parts