Bolton Tools ZX1048P, Инструкция по эксплуатации

Страница: 5 / 38

3.3 Remove all the anti-rust coating or grease from the machine. Fill the
machine with lubricant. Run the machine from low to high speed and check
if is normal.
3.4 There
’
s a reliable ground protection the ground wire must be connected
properly before it in operation.
4. Lubrication
Lubricate the sliding and rotating part before trial run.
Pour NO.40 machine oil into the Gear Box and the Power Feed(optional). Till
indicating through the oil level indicators then do a overall check..
Keep oil level above the mark.
Ⅰ
USAGE
The machine is used for cutting metals. It
’
s suitable to drill, mill and
widely use in the field of
instrument, machining for cutting a single part or a batch of parts.
M
odel ZX5325 serials drilling and milling machine has the characteristic
of strong rigidity and good stability.
Ⅱ
USE AND AINTENACE
(Refer to chart 1.)
1.
The user must read the operation Manual carefully,know structure and
ability of every
handle,the system of transmission and lubrication well.
2.
Before operating,inspect the normal conditions of the column lock
handle,the spindle sleeve and electric equipments. The ground line must
be connect in the ground.
3.
When the position of spindle Box to the working table need to be
adjusted,two clamping shaft(1)locating on the right side of Hoist
descend sliding must be lossed firstly, then turn the hoist-descend