Bolt VD-420, Руководство пользователя

Страница: 13 / 32

Mounting the Flash and Transmitter
|
13
Mounting the Flash and Transmitter
To mount the flash or transmitter on your camera, make sure the
VD-420 is turned off, and follow these steps:
1. Rotate the locking wheel counterclockwise to loosen it.
2. Slide the mounting foot all the way into your camera’s hot shoe.
3. Rotate the locking wheel clockwise until snug, but don’t overtighten.
Mounting the VD-420 on the included stand:
You can mount the VD-420 on the included stand in the same way you
would mount it on your camera. This allows you to set up the flash on a
flat surface or attach it to a tripod head, light stand, or clamp that has a
compatible 1/4-20 screw mount.
1
2
3