30
|
Setting Your VC-310N as a Wireless Slave/Remote
6. Press the F2 function button repeatedly to cycle through the four channels available between the master
and groups.
7. Press the Set button to confirm your settings.
To exit slave mode, press and hold the Mode button until the flash control modes appear on the LCD. Use the
arrows to use the arrows to select the flash control modes until you highlight the Normal mode.
Important!
When using a single slave flash, set it to the same group and channel as the master.
When using multiple slave flash units, select the same group and channel for all units being used in a
particular light position. For example, if you are using three VC-310N units, you might want to set one as a
main light on 1A, the second as a fill on light 1B, and the third as a hair on light 1C. With this setup, you have
the option of setting each group to a different output level via the master flash.