26
|
Setting Your VC-310N as a Wireless Master
Setting Your VC-310N as a Wireless Master
To set the VC-310N as a wireless master, follow these steps:
1. Press and hold the Mode button until the flash control modes appear on the LCD and are highlighted.
2. Press the right arrow repeatedly until the Master mode [ ] indicator is highlighted.
3. Press the Set button to confirm. The Master indicator will appear in the left-hand corner of the
LCD screen.
Setting up the Master channel (1–4):
1. Press the F2 function button [Ch] to highlight the master channel setting.
2. Press the F2 function button [Ch] repeatedly to cycle through the selectable master channels (1–4).
3. Press the Set button to confirm your settings.
GR
B
M 1/128
−−−
CH 1
TTL
−0 3EV
C
CH
MASTER
A
Overview
1. Master indicator
2. Groups/Group modes
3. Function button options
4. Output level
5. Exposure compensation
6. Master channel
5
3
4
6
1
2