Fig. 9.9
Fig. 9.10
Fig. 9.11
Fig. 9.12
Kit “H”
31
Kit “D”
45
43
44
42
48
11
12
13
48
23
23
9.3.7) Remove the crown pos.31 and the gears (kit “H”) (Fig.9.9).
9.3.8) Remove the pin pos.26 (kit “D”) and the parts pos.45-44-43-42 from the fl ange pos.48
(Fig.9.10).
9.3.9) Using a 4-mm hex spanner, undo and remove the screws pos.11, the pinion pos. 12
and the bush pos.13 from the fl ange pos.48 (Fig.9.11).
9.3.10) Using the dedicated tool, remove the seal and the O-ring pos.23 from their seats
(Fig.9.12).
SW 060-CF.09-MANUAL Rev.00
19
