Bollhoff RIVCLINCH 0201 FS, Руководство пользователя

Страница: 16 / 42

ATTEXOR Clinch Systems SA User manual
Copyright © 2010 by Bollhoff Attexor S.A. Page 16
•
Do not tilt the sheets when the punch has penetrated. Should the sheets get
stuck, depressurize the machine. Then liberate the sheet by pulling in the axial
direction of the punch.
•
Do not tilt the work head for disengaging the tooling. Always make sure that the
die blades are never forced
•
Never try to assemble sheets of other material or thickness than recommended in
the tables from chapter, “Tooling selection and joint optimization
Read carefully the WARNINGS at the beginning of the manual, prior to any operation or
testing.
Using of the clinching machine
The procedure to make a clinching point is the following:
•
Put together sheets of metal.
•
Approach the machine in order to have flanges between the punch and the die.
•
Put the fixed tool in contact with the flange.
•
Be careful that the tooling is perpendicular with the sheet & that there is nothing
between layers, particularly operator's fingers.
•
Press the clinching trigger (B1) without releasing until the total cycle has been
completed.
•
When the cycle is finished, release the trigger.
When there are several clinching points on the same flange, be careful that there are
enough distance between points in order not to touch other points during the clinching
cycle.