Bolin Technology SD500 Series, Руководство пользователя

Страница: 29 / 62

29
b. Manual Focus: Manually adjust camera focus as required.
c. One-Click Trigger: The camera is triggered to focus once when rotating, zooming or going to a
preset.
d. One-Click Trigger (IR): In a low light condition such as during night hours or in a dark house, this
focus mode achieves better effects with the IR light turned on.
B. Scene
a. Normal: Used for common scenes, such as road and industrial park.
b.
Long Distance: Used for long-distance monitoring on a road. For example, when the camera is
installed over 30 meters high to monitor a distant road intersection.
3. To restore the default settings, click Default .
White Balance
White balance is the process of offsetting unnatural color cast in images under different color temperatures so as to
output images that best suit human eyes.
NOTE:

This function is not supported by some models, please see the actual model for details.
1. Click Setup > Image > Image and then click White Balance .
2. Select a white balance mode as required. The following table
describes some major parameters.
A.
White Balance
:
Adjust the red or blue offset of the image:
a. Auto: The camera adjusts the red and blue offset automatically according to the light condition
(the color tends to be blue).
b. Fine Tune: Allow you to adjust the red and blue offset manually.
c. Sodium Lamp: The camera adjusts red and blue offset automatically according to the light
condition (the color tends to be red).
d. Outdoor: It is recommended for the outdoor scenes with a wide range of the color temperature
variation
e.
Locked: Lock the current color temperature settings without adjustment.
B.
Red Offset
a.
Adjust the red offset manually.
i.
You can set this parameter only when White Balance is set to Fine Tune .
C.
Blue Offset
a. Adjust the blue offset manually.
i.
You can set this parameter only when White Balance is set to Fine Tune.
3. To restore the default settings, click Default .
Defog
Use the defog function to adjust the clarity of images captured in fog or haze conditions.
NOTE:

This function can be configured only when WDR is disabled.
1. Click Setup > Image > Image and then click Advanced .
2. Enable the defog function and then select a level for the
scene. Level 5 achieves the maximum defog effects, and
level 1 achieves the minimum.
3. To restore the default settings, click Default .