Bolin Technology D Series Скачать руководство пользователя страница 8

Страница: 8 / 47

Overview

This user guide is suitable for the following models: D220

Features

•

Dante AV powered by Dante AV Module, support Unicast or Multicast Dante AV video streaming

over Standard 1Gbps Ethernet.

•

1/2.8 Inch CMOS sensor, Effective pixel number: 2.08 Megapixels.

•

Resolution: Up to 1080P60, 1080P59.94; supports 29.97 frame rate.

•

Video Format-HDMI 2.0, Color Space supports YUV(YCbCr), RGB.

•

IP Resolution: Up to 1080P60

•

Zoom: Optical 20X, Digital 2X.

•

Support WDR level 1-6.

•

Support Day/Night mode, PTZ Trace Memory, Noise Reduction, Tally Light.

•

Video Output: HDMI (1080P), Dante AV (1080P) simultaneously.

•

Codec with Ultra-low Latency mode

•

Synchronized Video and Audio.

•

Dante Ecosystem Friendly, Instant Dante Ecosystem compatibility with existing Dante-enabled

products, Unified control of audio and video using Dante tools - Dante Controller.

•

±175 degrees continuous pan, +90 degrees to -30 degrees continuous tilt.

•

128 presets, Speed up to 150°/S.

•

Standard mounting and ceiling mounting with E-Flip function

•

Control supports RS-232 control, RS-422/485 control, VISCA-over-IP, IR Remote Controller.

•

Image parameter setting restore with presets and quick access operation

•

Supports MIC/LINE audio input, Audio output with HDMI, embedded with Dante AV IP signal.

•

Power: DC 12V, PoE++ (IEEE802.3bt).

•

Firmware upgrade via USB2.0 or Dante Upgrade Tool.

Содержание D Series
















































Результаты поиска

Содержание D Series

Отзывы:

Похожие инструкции для D Series

Бренды по названию

Популярные бренды

Bolin Technology D Series, Руководство пользователя

Результаты поиска

Содержание D Series

Отзывы:

Похожие инструкции для D Series

Бренды по названию

Популярные бренды