background image

19 

 

Adjusting and Setting with Menus 

 
About On-Screen Menus 

You can change various settings, such as shooting conditions and system setup of the camera, while observing menus 
displayed on a connected computer screen. 
This section explains how to read the on-screen menus before starting menu operations. 
The menu parameters may vary according to the different product model numbers. 
For a complete configurations menu, see “Menu Configuration” (page 27). 
 

  Note 

 

You cannot perform pan/tilt operations while the menu is displayed. 

 

Main Menu 

To display the main menu, press the DATA SCREEN button on the supplied infrared remote controller. 
 

1.

 Selected Items 

 

Selects a setting menu. 
The selected item is shown by the cursor. The cursor moves up or down by 
pressing the “

↑, ↓” 

button on the infrared remote controller. 

 

2.

 Menu Items 

 

To display a setting menu, select one using the “

↑, ↓” 

button on the infrared 

remote controller and press the HOME button on the infrared remote 
controller. 
 

Setting Menus 

The setting menu selected on the main menu is displayed. 

1.

 Setting Menu

 

The name of the setting menu currently selected is displayed here. 

 

2.

 Selected Item

 

Selects a setting item. 
The selected item is shown by the cursor. 
Move the cursor up or down by pressing the “

↑, ↓” 

button on the 

infrared remote controller. 

 

3.

 Setting Items

 

The setting items for this setting menu are displayed. Select the setting item using the “

↑, ↓” 

button on the infrared remote 

controller. 

 

4.

 Set Value

 

The currently set values are displayed. 
To change a set value, use the “

←, →” 

button on the infrared remote controller. 

 

 

In some product models, only use 

←” button 

on the infrared remote controller to change the value. To confirm the value, 

you can use either “

→” button or HOME button.

 

 

Control Button 

You can select the item by pressing “

↑, ↓, ←, →” 

and HOME button. 

1. You can select a menu item by “

↑, ↓”

 button on the infrared remote controller. The selected item is shown by the 

cursor (Color change). You can change the value of the item by pressing “←, →” button. 

 

2. You can move to the next layer by pressing the HOME button. 

 

3. You can return to the normal display by pressing the DATA SCREEN button. 

 

 

When you are operating the menu using the infrared remote controller, you cannot set IR- RECEIVE in the SYSTEM 
menu to OFF. To set IR- RECEIVE to OFF, use the appropriate VISCA command. 
 
 
 

Note

 

Note

 

Содержание 8 Series
































Отзывы: