Solar Energy Australia
Doc No SPN-1601A Rev0803
Page 7
Bolero Manual
Off On
S/By
AC Status
Low DC
Overtemp
200mm
minimum
clearance
Off On
S/By
4. Start-up
Procedure
a)
Check battery condition and voltage are within specifications.
b)
Ensure the DC circuit breaker is set to the OFF (down) position.
c)
Plug in the AC connector, but do not switch ON.
d)
Switch DC circuit breaker to the ON (up) position.
e)
If all is well the AC status LED will be flashing green. This indicates all parameters are normal and the unit is in Standby
waiting for an AC load to be switched ON.
f)
Switch ON AC.
RS232
+
12VDC
-
300mm minimum
clearance
Chassis earth
