Solar Energy Australia
Doc No SPN-1601A Rev0803
Page 6
Bolero Manual
Tips
Avoid running AC/DC wiring next to other DC wires.
Avoid running AC/DC wiring near any antenna wiring.
Avoid running AC/DC wiring near audio equipment.
3.
DC Wiring -Vehicle
Observe All Polarities
Red = Positive
Black = Negative
DC Wiring
The primary consideration is to ensure that the battery bank voltage matches the DC input voltage rating of the inverter. The
batteries should be located only a short distance from the inverter in order to obtain best results, but not closer than 500mm. A
battery fuse must be installed no closer than 500mm from the battery to protect all wiring connected to the battery; we suggest the
use of an 80Amp motor start fuse for 12v input and 63Amp for the 24v unit.
Before making any connections, ensure the Bolero’s circuit breaker is in the
OFF (down)
position. Connect the inverter DC input
cables to the battery terminals via the battery fuse, ensuring the correct polarity (
RED =
positive).
Auxiliary
Battery
Dual Battery
Manager
Starting
Battery
SEA
Inverter
Optional
Solar
modules
Solar
Regulator
Fuse
Fuse
Vehicle
Alternator
–
+
+
_
