2
UK
Installation
1.
Use the holes in the back of the safe or in the base (dependant on mounting location) as a template to
mark the position of the safe.
2.
Fix the safe to the wall using suitable fixings (not supplied) for the mounting substrate.
Key Entry
Key entry is provided should the keypad code be forgotten or the batteries lose all power. To gain entry by
key:
1.
Gently prise the lock cover from the safe.
2.
Insert the key and turn anti-clockwise.
3.
Turn the handle clockwise to open the door.
4.
Turn the key anti-clockwise to lock the door.
Keypad Entry
1.
Enter the 3-8 digit code to unlock the door (see ‘Programming the Code’ for code programming
instructions) followed by the ‘#’ key.
2.
A beep sounds and the green light illuminates to signal the door is unlocked.
3.
Turn the handle clockwise within 5 seconds to open the safe.
Note: Ensure the mounting substrate is suitable and can support the weight of the safe.
Note: For security reasons, keys cannot be replaced if lost. Ensure keys are stored
safely.
Note: If the code is entered incorrectly at any time the amber light flashes and the alarm
sounds repeatedly.
Note: After 5 seconds the safe will time out and lock again. Repeat steps 1-3 to unlock
the door.
Note: The key will open the door at any time; even when the keypad has locked out.
Telephone Helpline: 0845 146 2887 (United Kingdom)/1300 225960 (Australia)