Bolder Surgical
en - CoolSeal™ Generator
Page | 23
Chapter 7. Technical Specifications
All specifications are nominal and subject to change without notice.
A specification referred to as “Typical” is within ± 20% of a stated value at room temperature (25°C / 77°F) and
a nominal line input voltage.
Caution
Read all warnings, cautions, and instructions provided with this generator before use. Specific instructions for
CoolSeal
™
instruments are not included in this manual. Refer to the CoolSeal
™
instrument’s instructions for use for
warnings, cautions, and instructions for its use.
Performance Characteristics
General
Output configuration:
Isolated output
Cooling:
Ambient
natural
convection
Display:
Indicator lamps and power stand-by switch
Connector ports:
LED illuminated connector detection
Mounting:
Operating room boom systems
Any stable, flat surface such as a table or cart top
Dimensions and Weight
Width:
30.5 cm (12 in.)
Depth:
38.1 cm (15 in.)
Height:
10.9 cm (4.3 in.)
Weight:
5.4 kg (12 lbs.)
Operating Parameters
Ambient temperature range: +10°C to +35°C
Relative humidity:
30% to 75% (non-condensing)
Atmospheric pressure:
67 kilopascals to 111 kilopascals
Warm-up time:
If transported or stored at temperatures outside the operating temperature range,
allow one hour for the CoolSeal
™
Generator to reach operating temperature before use.
Transport and Storage
Ambient temperature range: -20°C to +60°C
Relative humidity:
0% to 90% (non-condensing)
Atmospheric pressure:
46 kilopascals to 111 kilopascals
Internal Memory
Nonvolatile:
RAM
Storage capacity:
Memory can store information for the last 2000 seal cycles. Data is not patient specific
and
not
user
accessible.
