Böhnke + Partner Schmersal bp408, Руководство по эксплуатации

Страница: 14 / 24

14
3.3 bp408 testing program
The tests for the following variants are described herein:
a) the gearless drive unit with UCM braking system on the
traction sheave
b) the drive unit with gear (without UCM braking system on
the traction sheave) and with UCM speed limiter and
UCM safety gear
c) the hydraulic elevator (UCM valve)
d) The testing sequence must be observed.
3.3.1 General testing sequence
During the test the overspeed monitoring of the lift controller is
disabled.
3.3.1.1
Step 1
In order to check this function prior to commissioning, the
bp408 system module contains a test program The test pro-
gram is activated by a password in the maintenance menu.
The password can be assigned by the user in the setup
menu and may amount to a maximum of 8 digits. The de-
fault code upon delivery is “8103”.
After entering of the test code, a warning note is pro-
vided on the display of the control system.
The hazard warning "Caution!
Refer to the testing instruc-
tions!" appears in the display of
the control system after acti-
vating
the testing mode.