Böhnke + Partner Schmersal bp408, Руководство по эксплуатации

Страница: 11 / 24

11
3.2 General information on UCM function
3.2.1 Storage, transport and operating conditions
CAUTION!
Improper storage, transport or operating conditions can result in
destruction of the
system and danger to persons.

Storage and transport conditions
Ambient temperature: -20
°
C to 70
°
C,
relative humidity up to max. 90% (non-condensing)
 Operating conditions
Ambient temperature: 0
°
C to 60
°
C,
relative humidity up to max. 90% (non-condensing),
Max. height
- Types 230 VAC and 110 VAC: 2000 m
- Type 48 VAC/VDC: 4000 m
 The ambient temperature of the control cabinet must be be-
tween 0°C and 40°C. If the operating temperature is below
5°C, disturbance of visible characters on the LCD is expected.
In case of higher ambient temperatures, the cabinet must be
force-cooled (up to 60
°
C using fans, using cooling units
above that). Existing inlets and outlets for air conditioning
must be kept free.
 Aggressive mediums, dust, fog, water or humidity must not
reach the assemblies. The control cabinet should hence fulfil
at least protection class IP2xD.
 Condensation must be avoided on all components!
Example: Water condensation in damp machine room after
the control system is switched off
 In critical environments, please ensure there is enough sound
insulation to the building.
 Out system controls are designed for primary voltage 230 V
AC 50 Hz.
 When using residual current-protective circuits in control sys-
tems having frequency converters, it must be ensured that
these RCD circuit breakers must be sensitive to universal
current. Other RCD circuit breakers must not be used in ac-
cordance with DIN VDE 0160, 5.5.3.4.2 because the DC re-
sidual current generated through the input circuit of the fre-
quency converter could increase the minimum triggering level
of RCD circuit breaker culminating in non-triggering. The
maximum permissible release current of these selective RCD
circuit breakers that are sensitive to universal current must
not exceed value I
Δ
N=0.3 A.
3.2.2 Notes on installation
a) The UCM components must be used as intended and in
accordance with requirements. The operating instruc-
tions for the entire system (acquisition by the elevator
installing company) must be available.