background image

 

General Safety Instructions 

 
Always follow these basic safety precautions when using the system: 
 
1. Read carefully and understand all instructions. 
2. Follow all warnings and instructions marked on the product. 
3. DO NOT block or cover ventilation slots and openings. 
4. DO NOT place the product in a closed enclosure or cabinet unless proper 

ventilation is provided. 

5. Never spill liquid on the product or drop objects into the ventilation slots and 

openings. Doing so may result in serious damage to the components. 

6. Repair or service must be performed by a factory authorized repair facility. 
7. A UL/CSA approved power pack is provided. 
8. DO NOT staple or otherwise attach the power supply cord to building surface. 
9. DO NOT use the product near or in wet or damp places, such as wet basements. 
10. DO NOT use extension cords. Install within six feet of a grounded outlet 

receptacle. 

11. DO NOT install during lightning storm. 
12. Never touch un-insulated wires or terminals unless the unit is disconnected from 

both power and the rest of the phone system. 

13. Use Caution when installing or modifying configuration switches or control lines. 
14. The unit must be securely attached to a wall board, rack or table mounted. 
 
 

CAUTION: 

If any wiring from the system leaves the premises, 
you must use proper electrical protectors. 

 
 

Regulations: 

 

FCC (Part 15) Radio Frequency Interference 

 
The BOMDMU generates and uses radio frequency energy and if not installed and 
used in strict accordance with the manufacturer's instructions, may cause interference 
to radio and television reception. Unit complies with the limits for Class A devices in 
accordance with the specifications in Subpart J of Part 15 of the FCC Rules. This 
testing is designed to provide reasonable protection against such interference. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause interference to radio or television reception, 
which can be determined by turning the unit off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 
 

 

Reorient the radio or TV receiving antenna. 

 

 

Relocate the unit with respect to the radio or TV receiver or vice-versa. 

 

 

Plug the unit into a different outlet so that it and the radio or TV receiver are 
on different branch circuits 

 

 

If necessary, the user should consult the dealer or an experienced 
radio/television technician for additional suggestions. 

 

 

 

 

Limited Warranty; Exclusion of Certain Damages

 

The 

BOMDMU Messaging and Call Stacking System

 is warranted to be free 

from defects in material and workmanship for one (1) year from the date of sale to 
the original purchaser. Any part of any Bogen product covered by this warranty 
that, with normal installation and use, becomes defective (as confirmed by Bogen 
upon inspection) during the applicable warranty period, will be repaired or 
replaced by Bogen, at Bogen’s option, provided the product is shipped insured 
and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, 
NJ 07446, USA. Repaired or replacement product will be returned to you freight 
prepaid. This warranty does not extend to any of our products that have been 
subjected to abuse, misuse, improper storage, neglect, accident, improper 
installation or have been modified or repaired or altered in any manner 
whatsoever, or where the serial number or date code has been removed or 
defaced.

 

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE 
WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. 
BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS 
OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND 
EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW.

 Bogen's 

liability arising out of the manufacture, sale or supplying of products or their use or 
disposition, whether based upon warranty, contract, tort or otherwise, shall be 
limited to the price of the product. IN NO EVENT SHALL BOGEN BE LIABLE 
FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, 
BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF 
USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR 
SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some States do not allow the 
exclusion or limitation of incidental or consequential damages, so the above 
limitation or exclusion may not apply to you. This warranty gives you specific legal 
rights, and you may also have other rights which vary from State to State.

 

Products that are out of warranty will also be repaired by the Bogen Factory 
Service Department -- same address as above or call 201-934-8500. The parts 
and labor involved in these repairs are warranted for 90 days when repaired by 
the Bogen Factory Service Department. All shipping charges in addition to parts 
and labor charges will be at the owner's expense. All returns require a Return 
Authorization number. For most efficient warranty or repair service, please include 
a description of the failure.

 

Products manufactured and labeled by other companies may be covered by 
warranties offered by such companies. Please call Bogen Customer Service or 
refer to product packaging for manufacturer’s warranty for non-Bogen branded 
products. 
 
12/2008

 

Содержание BOMDMU
























Отзывы: