Bogen Communications
50 Spring Street
Ramsey, NJ 07446
201.934.8500 P.
201.934.9832 F.
www.bogen.com
Technician Level Programming
Setting the Bias Seconds from the LCD Display
The bias seconds allows the user to offset how many seconds, plus or minus, the time will be when receiving an input. This field can range
between plus or minus 0-7500 seconds.
1) Type in 6063 at the main screen to enter the technician level menu mode.
2) Press the NO/CANCEL button until the screen shows “Set Bias Seconds?” as shown in Fig 3.15.
3) Press the YES/ENTER button.
4) Set the bias seconds using the keypad between 0000 - 7500 seconds as shown in Fig 3.16. Use the
↑
and
↓
buttons to select positive or negative
biasing.
5) Press the YES/ENTER button.
6) To exit and return to the main screen, continue to press the NO/CANCEL button until the main screen appears.
Setting the Time Zone Offset from the LCD Display
The time zone offset will allow the time zone to be offset when a SNTP or GPS connection is present. For a list of typical offsets, see Fig 4.1 on
page 42.
1) Type in 6063 at the main screen to enter the technician level menu mode.
2) Press the NO/CANCEL button until the screen shows “Set Time Zone Offset?” as shown in Fig 3.17.
3) Press the YES/ENTER button.
4) Using the
↑
and
↓
buttons to select the positive or negative offset, then enter the time zone using the keypad as shown Fig 3.18.
5) When the desired offset is chosen, press the YES/ENTER button to confirm the selection.
6) To exit and return to the main screen, continue to press the NO/CANCEL button until the main screen appears.
Fig 3.15
Fig 3.17
Fig 3.18
Fig 3.16
