manualshive.com logo in svg

BOGBALLE M2, Руководство оператора, Страница: 27 / 48

Поделиться
Скачать
BOGBALLE M2 Скачать руководство пользователя страница 27

 

M2(W) / M3(W) / M6W

 

 

 
 

 

26 

 

 

HEADLAND

 

spreading

, 

TO BORDER

, 

with border to the right in the driving direction.

 

 

The BOGBALLE machine can optionally 

…..be changed to HEADLAND spreading – without leaving the tractor cab.

 

This way you have a very user friendly system – which ensures at the same time 
optimum headland spreading. 

While spreading on HEADLAND the NORMAL settings of the machine are 
retained – except: 

 

 

THE ROTATION DIRECTION OF THE SPREADING DISCS 

 

The back side of the vane is used 

 

 

  ALWAYS STOP PTO when changing the rotation direction!

 

 PTO- 

SPEED 

 

QUANTITY SETTING / SPEED 

(Only at spread widths from 12 to 18 metres).

 

At spread widths from 19 to 42 metres the quantity is NOT reduced. 

 

•

 

It must be considered that the fertiliser when spreading on HEADLAND – will to a 
higher extent than in NORMALspreading – be thrown forwards in the driving direction. 

 

 
 
 

 

 
 
 
 
 
 

 

  The rotation direction is changed so that the spreading discs rotate ”away from 

centre”. 

(See FUNCTION OF SPREADING VANE / Trend SYSTEM) Is done manually or by 

cable.

 

 

  The PTO speed is reduced in order to limit the spread width. 

There is a direct connection between the PTO speed and the HEADLAND  
spread width. 

 

The higher PTO speed – the wider HEADLAND spread width. 
This means in practice that it is possible to ”choose” the required 
HEADLAND  
spread width – depending on the wish of spreading FULL quantity TO 
BORDER, or if a REDUCED quantity TO BORDER is required. 

(See examples 

of HEADLAND spread patterns 

,

 og 

).

 

 

 

 

  The quantity is reduced either by reducing the outlet (setting system) or by 

increasing the forward speed. The quantity is changed in comparison to the 
PTO speed. 

(Only at spread widths from 12-18 m).

 

 

HEADLAND 
Shift handle in outmost position

 

 

 

 

Содержание M2

















































Отзывы:

Нет отзывов