M2(W) / M3(W) / M6W
16
24 – 305
E-2
1-2
Kg/Ha
Km/h
Kg/min
±
cm
8
10
12
14
1,0
24
19
16
14
7,7
3
4
1,5
53
42
35
30
16,9
3
4
2,0
94
75
63
54
30,1
3
4
2,5
147
118
98
84
47,1
3
4
3,0
206
165
137
118
66,0
2
3
Såtabel
QUANTITY SETTING
,
Spread chart / Internet:
www.bogballe.com
The spread chart for M() is identical to the EX chart.
Spread chart for M()(+40%) is identical with EX(2)-chart
. (Qu 40%).
If case the machine is not equipped with CALIBRATOR, the quantity setting is made
on the basis of the instructions in the spread chart.
It must be noted that the spread chart is only a guide, because the quantity spread
depends on the exactness of the driving speed and the tramline distance, but also
of the quality of the fertiliser in question.
The fertiliser will change character according to temperature, air humidity and often
varies with each delivery.
If an exact quantity is required (Kg/Ha), it is recommended to CALIBRATE the
machine by use of the BOGBALLE rate check kit.
(See the paragraph ”USE OF RATE
CHECK KIT”)
Refer to the appropriate chart for the material to be spread for the settings required.
Spread chart
Vane type
Scale
setting
Vane
position
Tilt
angle (
°
)
Kg/Ha
Km/h
NB !
Vane type:
E-1
corresponds to
E1 T
(L/R)
E-2
corresponds to
E2 T
(L/R)
E-6
corresponds to
E6 T
(L/R)
E-8
corresponds to
E8 T
(L/R)
U-1
corresponds to
U1 T
(L/R)
The quantity (Kg/Ha) is set by the scale pointer of the
machine.
The setting system is equipped with a scale and a scale
stop with stepless movement – and fixed in the inverval
from 0 to 9 and with ”marks” for each 0,25 scale step.
The example shows the scale stop set to ”0”, corresponding
to a closed outlet of the machine.
Example:
12
Km/h
Scale
=
2,5
98
Kg/Ha
Tilt = 3
°
Kg/min
Chart
number
Spread
width
24-305
±
cm