Operation
Turning extraction unit On
There are 2 stages to powering up your iQ extraction unit.
Firstly the main isolation switch must be switched to the
“On” position (Refer to section
1
for switch location).This
will place the extraction unit in Standby mode, indicated by
the front panel power button glowing Red.
To start the extraction unit press the front panel power
button (refer to section
1
for switch location) the button will
change from Red to Green indicating the extraction unit is
now fully On.
It is recommended that the rear isolation switch is left in the
On position and the front standby switch is used to toggle
the extractor On / Off.
Changing the display units
The Airflow and temperature readings can be displayed in 2
ways.
1.
Temperature displayed as
o
C
Airflow displayed as m
3
/h
OR
2.
Temperature displayed as
o
F
Airflow displayed as CFM
The display value can be changed by pressing the “Enter”
button once.
5
01
Содержание AD1500 iQ
Страница 1: ...AD1500 iQ ...
