4
1.0 Safety
The following symbol marked on the equipment means:
Caution:
Read these operating instructions fully before use and pay
particular attention to sections containing this symbol.
Attention:
Suivre attentivement les instructions avant l’usage et
prêtez une attention particulière aux sections comportant ce
symbole.
Always observe the following safety precautions :
Use only as specified by the operating instructions or the intrinsic
protection may be impaired.
After transport or storage in humid conditions, dry out the unit
before connecting it to the supply voltage. During drying out
the intrinsic protection may be impaired.
Do not lift the Rotator by the Tray.
Risk of Binding:
Assure that other equipment close to the Rotator
does not cause interference with the tray movement.
Connect only to a power supply that provides a safety ground
terminal.
Before moving, disconnect at the power supply socket. Do not
remove the plug from the rear of the unit.
Ensure that the power switch is easily accessible during use.
Do not block or restrict ventilation slots.
If liquid is spilled on top of the unit, disconnect it from the power
supply and have it checked by a competent person.
It is the user’s responsibility to carry out the appropriate
decontamination if hazardous material is spilled on or inside the
equipment.
This product must be used with an UL / CSA Certified power
supply cord set rated for a minimum temperature of 90˚C.
The Power Cord supplied with the unit is the disconnect means.
Do not position the unit so that it is difficult to operate the
disconnecting means.
Caution should be taken when operating the Orbitron V with
heavy loads at high speed. Always start the Orbitron V at low
speed and gradually increase the speed to the desired setting.
