Boehringer Miditron Junior II, Руководство по обслуживанию

Страница: 32 / 137

Service Manual Miditron
®
Junior II / ID 1997491 / MJ / 1.0 - June 1998 / Page 32
If the analyzer has not been used for more than 10 minutes,
it automatically enters Standby Mode. The display blanks
out and the status LED is red. When you press any function
key (except <Line Feed>), the analyzer performs a self-
check and returns to "READY - <START>" , "ACC MODE
<START>" or "FAST MODE <START>", depending in which
mode was selected most recently.
6.2 Normal Mode
In Normal Mode the display reads "READY - <START>".
Press <Start>, dip a test strip and then insert it in the
analyzer. You can repeat this procedure every 36 seconds.
The sample throughput is about 100 test strips per hour.
Before a test strip is read, you can enter the colour and/or
clarity of the sample, in which case "Color Manual" and/or
"Clarity On" must be selected in the Setup menu. In
addition, the Patient ID may be entered with the aid of a
barcode reader or through the numeric keypad.
6.3 Accelerated Mode
In Accelerated Mode (a batch mode for processing series
of samples) the display reads "ACC MODE <START>". After
you have pressed <Start>, you may dip and insert a test
strip, when prompted, into the analyzer every 20 seconds.
The sample throughput is about 180 tests per hour. In
Accelerated Mode, the colour and/or clarity of a sample
may be entered before the test strip is read, in which case
"Color Manual" and/or "Clarity On" must be selected in the
Setup menu. In addition, the Patient ID may be entered with
the aid of a barcode reader or through the numeric keypad.
In Accelerated Mode, there are up to 3 test strips incubating
outside the analyzer.
6.4 Fast Mode
In Fast Mode (a batch mode for processing series of
samples) the display reads "FAST MODE <START>". After
you have pressed <Start>, you may dip and insert a test
strip into the analyzer every 12 seconds. The theoretical
sample throughput is 300 tests per hour. In Fast Mode,
there are up to 5 test strips incubating outside the analyzer.
6. Operation