7
BM-300M
2.2.5
Connecting the Power (Fig.8-10
）
★
The cable and cords are vulnerable when
bent or twisted, never subject the power cord to
excessive force.
1.
Set the main switch
①
to “O” (off) state
before connecting the power cord.
2.
Insert the plugs
②
into the power jack
③
of
the microscope safely.
3.
Plug the power cord
④
into the power supply
receptacle
⑤
. Make sure the connection is
well.
★
Do use the supplied power cord all the time.
If lost or damaged, select the same standard
cord, please.
★
A wide range of voltage ,like 100V
～
240V,
is acceptable for this microscope.
2.2.6
Replacing the fuse
（
Fig.8-10
）
Do remember to set the main switch
①
to the
state “O” (OFF) and unplug the power cord before
replacing the fuse. Rotate the fuse
⑥
out of the
holder with the “--”type screwdriver, replace with
a new fuse, then rotate it back to the holder again.
Fig.8
Fig.9
Fig.10
