20
Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the running belt
deviation.
I
f the belt has drifted to the right, unplug the safety
lock and power switch, and turn the right adjusting
bolt 1/4 turn clockwise, then insert the power
switch and safety lock, make the treadmill running,
observe the running belt deviation. Repeat above
steps until the running belt is placed in the middle.
See picture A
Once the treadmill belt swerving to the left, unplug
the safety lock, turn off the power, then with the
left adjusting bolt clockwise rotation 1 / 4 turn, and
turn on the safety lock and power to make
treadmill running, checking the deviation of the
treadmill belt. Repeat the above steps until the belt
is centered.
See picture B
The treadmill belt will gradually stretch after
above steps or after a period of time using. Unplug
the safety lock, and turn off the power, with the
two adjusting bolt clockwise rotation 1 / 4 turn,
and turn on the safety lock and power to make
treadmill running, then standing on the belt to
confirm the tightness. Repeat the above steps until
the belt
has
moderate tightness.
See picture C
Belt Adjustment
