ERG7000
Page 7
Assembly STEP 1
Front & Rear Stabilizer Assembly
With the help of an assistant, attach the
Front Stabilizer (#04)
to the
bracket at the front of
Main Frame (#01)
. Insert two
Carriage Bolts
(#13)
through the front of
Front Stabilizer (#04)
and through the
Main
Frame (#01)
. Secure them together using two
Arc Washers (#17)
and two
Cap Nuts (#15)
as illustrated in the diagram.
Next, attach the
Rear Stabilizer (#05)
to the bracket at the rear of
Main Frame (#01)
. Insert two
Carriage Bolts (#13)
through the
Rear
Stabilizer (#05)
and through the back of
Main Frame (#01)
. Secure
them together using two
Arc Washers (#17)
and two
Nuts (#15)
.
Hardware Required
Front Roller
17
15
13
04
05
15
17
22
22
1
11
NOTE BEFORE STARTING THE ASSEMBLY PROCESS :
To avoid misalignment due to over-tightening, please do not use a
wrench and use only hand-tightening for now to ensure
easy assembly.
Wrench-tightening should be performed after all parts are assembled
to ensure all nuts, bolts, and parts are tightly secured before use.
#13 Carriage Bolt (M8x60mm)
[4 pieces]
#17 Arc Washer (M8)
[4 pieces]
#15 Cap Nut (M8)
[4 pieces]
Remove the Spring Loaded Knob (#11),
that is pre-assembled on the Main
Frame (#01), set it aside as it will be
used in a later process.
