ERG7000
Page 10
Assembly STEP 4
Hardware Required
Pedal Assembly
Screw the
Left Pedal (#10L)
to the
Left Crank (#09L)
by turning the
bolt head on the
Left Pedal (#10L) COUNTER-CLOCKWISE
. Screw
the
Right Pedal (#10R)
to the
Right Crank (#09R)
by turning the bolt
head on the
Right Pedal (#10R) CLOCKWISE
.
Please use drawing below for reference.
NOTE:
If labels designating the Left/Right Pedal are not present, please
check pedals closely for embossed “L”/ “R” letter marks. These will be
“L” / “R” letters that are raised on the pedal material.
10L
10R
01
09R
09L
THE ASSEMBLY PROCESS IS NOW COMPLETE.
However, for your own safety, please make sure to read this entire Owner’s Manual which includes
safety instructions and warnings, as well as any safety/warning labels affixed to the product before use.
For your safety , please visually and functionally inspect and test the unit after assembly is complete.
No hardware needed
