BodyCraft R25, Сборка и каталог запчастей

Страница: 4 / 18

Step 3 Handlebars
1.
Before bolting the Handlebars (7L, 7R) to the Seat Frame (5), you must first connect the
Pulse Handlebar Wire (42) to the Pulse Coiled Wire (41) on the Seat Frame (5). Store excess
wire in the Handlebar. Attach each Handlebar (7L & 7R) to the Seat Frame (5) using two M8
Spring Washers (104), and two M8 x 15L Dome Head Allen Bolts (84) as shown in Fig. C1.
2.
Insert the Seat Adjustment Handle (11) into the bracket welded to the Seat Frame (5). As
shown in Fig. C1. Orient the flat side on the Seat Adjustment Handle (11) toward the two
M8 x 8L Set Screws (97) and then tighten the Set Screws (97) against the flat side.
Step 4 Assemble Pedals
IMPORTANT The Left Pedal is Reverse Thread
Start threading each pedal by HAND , THEN FULLY
TIGHTEN each pedal with a wrench. Using a wrench
to start the procerdure or not fully tightening the
pedals can damage the crank arms.
1.
The pedals are specific to each side. The Right side has
an "R" on the end of the threaded axle and the Left has
an "L".
CAREFULLY screw each pedal in by HAND .
The Left pedal screws in counter-clockwise.
2.
FULLY tighten each pedal with Wrench (122) .
3
C1
C2
C3
41R
42R
41L
42L
D1
23R
12R
12L
23L
42L
41L
97
5
11
42R
41R
84
7R
84
7L
104
104