BodyCraft R25, Сборка и каталог запчастей

Страница: 3 / 18

Step 1 Front & Rear Stabilizer
1. Use a Styrofoam block from the packing material to raise the front of the Bike Assembly
then attach the Front Stabilizer (2) using two 3/8" x 2-1/4" Hex Head Bolts (79), as shown in
Fig. A2. Tighten these bolts. Remove the Styrofoam block.
2.
Use a Styrofoam block from the packing material to raise the rear of the Bike Assembly then
attach the Rear Stabilizer (3) using two 3/8" x 2-3/4" Hex Head Bolts (78), two 3/8" Spring
Washers (103), and two 3/8" Acorn Nuts (118), as shown in Fig. A3. Tighten these bolts.
Remove the Styrofoam block.
3.
Once the bike is in its final location, there are Adjustable Levelers (44) under each end of
the Rear Stabilizer (3) that need to be adjusted to ensure the bike is totally stable on the floor.
Step 2 Seat & Mesh Back
1.
Attach the Seat Pad (28) to the Seat Frame (5) using four M8 Spring Washers (104) and four
M8 x 20L Hex Head Threaded Bolts (81) as shown in Fig. B1. Tighten these bolts.
2.
Unsnap the Back Frame Cover (14) from the Mesh Back Support (18). Attach the Mesh Back
Support (18) to the Back Support Frame (8) using four 1/4" x 1" Machine Screws (89). Tighten
these screws. Reapply the Back Frame Cover (14).
2
A3
78
3
1
118
103
44
45
44
45
A1
A2
79
2
1