background image

IMPORTANT SAFETY NOTES

Basic precautions should always be followed, including the following safety

instructions when using this equipment:

Read all instructions before using this equipment.

WARNING:

There is a risk assumed by individuals who use this type of equipment. Before

beginning  this  or  any  other  exercise  program  consult  your  physician.  This  is  especially
important for individuals over the age of 35, pregnant women,or persons with pre-existing
health problems. Recreation Supply, Inc. assumes no responsibility for personal injury or
property damage sustained by or through use of this product.

1. It is recommended that you perform warm up exercises before using this equipment.

2. Please make sure all components are not damaged and in working order. Inspect the product
before  each  use.  This  is  especially  important  after  the  first  10  hours  of  use.  Pedals  and  other
hardware can sometimes work themselves loose. Tighten any loose parts.

3. This equipment should be assembled and placed on a flat surface while in use. Using a mat or
other material on the ground is recommended.

4. Please wear proper clothes and shoes when using this equipment; do not wear clothes
that might catch in any part of the equipment.

5.  Do  not  attempt  any  maintenance  or  adjustments  other  than  those  described  in  this  manual.
Should any problems arise, discontinue use and consult an Authorized Service Representative.

6. Use caution when stepping on or stepping off the machine. Always hold the stationary
handlebars when getting on and off the machine.

7. Do not use the equipment outdoors.

8. This equipment is for household or light commercial use only.

9. Only one person should be on the equipment while in use.

10. Keep children and pets away from the product while in use. This machine is designed
for adults only.

11. If you feel chest pains, nausea, dizziness, or shortness of breath, you should stop
exercising immediately and consult your physician before continuing.

12. The maximum weight capacity for this product is 350 lbs /160 kgs.

13. Clean pads and frame on a regular basis. We recommend warm,soapy water. Do not use harsh
or abrasive chemicals.

14. If unsure about the proper use of the BODYCRAFT

R200

call your local BODYCRAFT dealer

or our customer service department at 800-990-5556.

1

Содержание R200 Recumbent





















Отзывы: