Assembly is complete!
Please take the following steps before using the gym:
Thank you for purchasing the BODYCRAFT HFT Strength Training
System. If you have any questions or comments, please contact your
local BODYCRAFT dealer. www.ibodycraft.com
1. Make certain all bolts are tightened securely.
2. Make certain all Cable Bolt Jam Nuts are properly secured.
3. Make certain all cables are seated into all pulley grooves and pulley retainers properly
aligned. A cable rubbing against steel will damage the nylon coating, voiding warranty
and resulting in a need for replacement.
4. Pre-stretch the cables. The cables may require an additional adjustment after the first
few workouts. To speed up this process you can put the Weight Selector Pin in the
bottom hole on the weight stack. Carefully pull on the cables with great force,
providing any initial cable stretch.
5. The cables should be adjusted as tight as possible, but no so tight as to lift the Top
Plate above the weight stack. Be certain to secure the jam nuts after adjustments are
made.
6. For better performance, apply a household lubricant (such as silicone) to any
adjustable areas and to the Guide Rods.
MAINTENANCE:
1. Inspect cables for bulging fraying and damage prior to each workout.
2. Inspect all accessory attachments for wear prior to each workout.
3. Inspect all bolts and welds weekly.
4. Inspect pulleys for visible damage and wear weekly.
5. Clean and apply silicone to the Guide Rods every 6 months.
Enjoy many years of a Fit Lifestyle.
