BodyCraft F738 Скачать руководство пользователя страница 5

Страница: 5 / 84

There is a risk assumed by individuals who use this type of equipment.

A moment’s lack of attention can result in an accident, as can failure to

observe certain simple safety precautions.

Read, study and understand the Assembly Instructions and all the warning labels on

this product. Furthermore, it is recommended to familiarize yourself and others with

the proper operation and workout recommendations for this BODYCRAFT product

prior to use.

● Before beginning this or any other exercise program, consult your physician. This is

especially important for individuals over the age of 35 or persons with preexisting health

problems. Recreation Supply, Inc. assumes no responsibility for personal injury or

property damage sustained by or through use of this product.

●

Exercise with care to avoid injury.

Do not attempt to lift more weight than you can control

safely.

● This product must be assembled on a flat, level surface to assure its proper function.

● Clean pads and frame on a regular basis. We recommend warm, soapy water. Do not

use harsh or abrasive chemicals.

● Inspect and tighten all parts before every use. Replace any worn parts immediately.

Failure to do so may result in serious injury.

● Keep children away from any BODYCRAFT strength

machines at all times.

● Keep your hands away from cables and pulleys during

operation, other than the designated handles.

●

Keep hands, limbs, loose clothing and long hair well out of the way of moving parts.

● Inspect the unit for any sign of wear on parts, hardware becoming loose or cracks on

welds. If a problem is found, do not use or allow the machine to be used until the defective

part is repaired or replaced.

●

It is imperative that you retain these Assembly Instructions and be sure all warning labels

are legible and intact. Replacement Assembly Instructions and labels are available from

BODYCRAFT.

If you are unsure about the proper use of the BODYCRAFT strength

machine call your local BODYCRAFT dealer or our Customer Service Department.

Contact BODYCRAFT at

Product Safety - Benches & Racks

Содержание F738





















































































Результаты поиска

Содержание F738

Отзывы:

Бренды по названию

Популярные бренды

BodyCraft F738, Руководство пользователя

Результаты поиска

Содержание F738

Отзывы:

Бренды по названию

Популярные бренды