STEP 2 Weight Base Assembly
5
605
604
613
613
637
612
608
604
610
610
610
601
622
624
624
602
624
625
624
625
621
606
1. Attach the Weight Base (602) to the
Square Rear Stabilizer (601), using
two 3/8" X 3" Hex Head Bolts (622),
four 3/8" Washers (624) and two 3/8"
Nylon Nuts (625).
2. Attach three 45 X 75mm Caps (610)
to the Weight Base (602).
3. Insert the two Guide Rods (605) into
the holes in Weight Base (602) and
slide two Stack Spacers (604), two
Rubber Cushions (613) over top and
4. Slide the 10 lbs Plate (608) (19 pcs)
over top and down the Guide Rod
(605). Make certain that each plate is
oriented with selector hole on bottom
and facing forward. Attach Top Plate
(606) to Selector Rod (612) using the
Top Plate Bolt (621). Tighten with a
hex wrench. Slide the Top Plate (606)
over and down the Guide Rods (605).
