14
S T E P
3
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step.
Do not wrench tighten until end of Step 3.
NOTE
: Support Plates may have additional holes which do not affect operation.
A.
Connect Front Upright Frame (B) to Left Base Frame (L) as shown using:
Two 1 (M12x100 hex head bolt)
Two 4 (M12x75 hex head bolt)
Eight 8 (M12 washer)
Four 7 (M12 nylon lock nut)
B.
Connect Front Upright Frame (B) to Right Base Frame (A) as shown using:
Two 1 (M12x100 hex head bolt)
Two 4 (M12x75 hex head bolt)
Eight 8 (M12 washer)
Four 7 (M12 nylon lock nut)
C.
Install Side Frame (E) onto Left Base Frame (L) and secure using:
Two 1 (M12x100 hex head bolt)
Four 8 (M12 washer)
Two 7 (M12 nylon lock nut)
D.
Secure Side Frame (E) with 75x150mm Support Plate (S) to Rear Upright Frame (Q) using:
Two 3 (M12x80 hex head bolt)
Four 8 (M12 washer)
Two 7 (M12 nylon lock nut)
E.
Install Side Frame (E) onto Right Base Frame (A) and secure using:
Two 1 (M12x100 hex head bolt)
Four 8 (M12 washer)
Two 7 (M12 nylon lock nut)
F.
Secure Side Frame (E) with Support Plate 75x150mm (S) to Rear Upright Frame (Q) using:
Two 3 (M12x80 hex head bolt)
Four 8 (M12 washer)
Two 7 (M12 nylon lock nut)
G.
You may now wrench tighten all hardware that has been installed in Step 1 - Step 3.
