Body Sculpture BSB-512, Руководство пользователя

Страница: 7 / 15

6
ASSEMBLY INSTRUCTIONS
Tools Required Assembling the Machine: Two Adjustable Wrenches, and one Philips
Screw driver.
NOTE: It is strongly recommended this machine to be assembled by two or more people
to avoid possible injury.
Carefully unpack each component, checking against the part list that you have all the
necessary parts to complete the assembly of your product
PLEASE NOTE that some of the parts may be pre-fitted to major components. So please
check carefully before contacting Argos in any event.
Step 1 (See Below Diagram 1)
A). Attach the Main Frame(#1) to the Front Stabilizer(#2), Align the hole and secure with two
M10X 55 mm Hex Bolts (#22) four
Φ10mm
Washers (#27) and two M10 Aircraft Nuts (#29).
B.) Attach the Rear Base Support(#3) to the Main Frame(#1), Align the hole and secure with
one M8X55mm Hex Bolt(#21) two φ8mm
Washers
（
#26
）
.
Diagram 1