Body Sculpture BC-2935, Руководство пользователя

Страница: 8 / 14

6
STEP 4
The Left and Right Pedal (55L) and
(55R) are marked “L” and “R”.
Connect them to their appropriate
Crank Arm. The right pedal is on the
right hand side of the cycle as you sit
on it.
Note that the right pedal should be
threaded on clockwise and the left
pedal on anti-clockwise.
STEP 2
1.
Fix seat (pt.26) to the support tube (29) using 3
sets of Flat Washer (27) and Lock nut (28).
2.
Attach the seat back cross beam (81) to the
support tube (29) using 2 sets of bolt (M8*50)
(78), flat washer (
φ
8) (80), spring washer (
φ
8) (79) and domed nut (M8) (22).
3.
Attach the handlebar (7) to the seat back cross
beam (81) using 2 sets of screw (M8*16) (21),
spring washer (
φ
8) (79) and flat washer (
φ
8)
(80).
4.
Connect the lower pulse sensor wire (5B) with
the middle pulse sensor wire (5A).
STEP 3
1. Fix Back pad (84) to the back pad tube
(86) using 2 sets of Flat washer (
φ
8) (80)
and Bolt (M8*30) (37).
2. Attach the back pad tube (86) to the Seat
Back cross beam (81) using of bolt (M8*50)
(83) , flat washer
(
φ
8)
(80),
spring washer
(
φ
8) (79)
and Domed Nut (M8) (22), then
insert the lock pin(82) to fix the position.
3. Connect the upper pulse sensor wire (5)
with the middle pulse sensor wire (5A).
4.
Attach the support tube (29) to the Main
frame (p31) using Adjustable knob (pt.32)